Podcasts
Human Resources

Emiratisation and Saudisation in 2026: Localisation Targets as a Workforce Planning Problem

Fizza Fatima NaqviJuly 3, 20267 min read
Emiratisation and Saudisation in 2026: Localisation Targets as a Workforce Planning Problem

Key takeaways

  • Digital authentication is mandatory: Saudi employees only count toward Saudization quotas if their contracts are electronically documented and authenticated on the Qiwa platform (middleeastbriefing.com).
  • Wage thresholds impact compliance: In Saudi Arabia, employees earning below SAR 3,000 do not count toward Saudization targets, while those between SAR 3,000 and SAR 4,000 count as 0.5 Saudi Unit (vialtopartners.com).
  • Engineering sector requirements: Companies with three or more workers in 46 engineering professions must meet a 30 percent quota with a minimum monthly salary of SAR 8,000 and Saudi Council of Engineers accreditation (middleeastbriefing.com).
  • Real-time oversight: Compliance for the Nitaqat programme is driven through the Qiwa platform using real-time workforce data assessment (vialtopartners.com).

As of July 3, 2026, the regulatory environment for localization in the Gulf has moved from a periodic compliance exercise to a continuous data management requirement. In Saudi Arabia, the Nitaqat Mutawar Program entered a new phase on April 16, 2026, which runs through 2028 (middleeastbriefing.com). The data must be live, authenticated, and aligned with specific wage and professional accreditation benchmarks.

The shift from headcount to data authentication

For many years, localization was often viewed through the lens of total headcount. A company could look at its payroll and see a certain number of nationals and assume they were compliant. The current Saudi framework has rendered that approach obsolete. Since April 15, 2026, a Saudi employee no longer counts toward a company’s Saudization percentage unless their employment contract has been electronically documented and authenticated on the Qiwa platform (middleeastbriefing.com).

This mechanism changes the behavior of both the employer and the employee. For the employer, the administrative burden has shifted from simple payroll entry to active digital management. If a contract is not authenticated on Qiwa, the employee is effectively invisible to the Nitaqat calculation, regardless of their actual presence in the office. For the employee, the formalization of the contract via a government-mandated platform provides a level of digital certainty regarding their employment status and rights.

The practical implication is that "ghost" compliance, where an employee is on the payroll but not officially linked to the company's Nitaqat profile, is no longer a risk that can be ignored. The Ministry of Human Resources and Social Development (MHRSD) has moved toward real-time workforce data assessment through the Qiwa platform (vialtopartners.com). This means compliance is not a snapshot taken once a year; it is a live score that fluctuates with every new hire, contract update, or resignation.

The move toward real-time, platform-based compliance means that "compliance lag" is now a financial and operational risk. If your digital records do not match your physical workforce, your Nitaqat status will reflect the discrepancy immediately.

Watch For

The math of the "Half-Unit" and wage thresholds

The complexity of workforce planning in Saudi Arabia has increased due to the granular way the Nitaqat programme calculates units based on salary levels. We are seeing a tiered system where the value of a national employee is tied directly to their compensation level. According to the MHRSD, employees earning between SAR 3,000 and SAR 4,000 count as 0.5 Saudi Unit (vialtopartners.com). Also, employees earning below SAR 3,000 are not counted towards Saudisation targets at all (vialtopartners.com).

This creates a significant tension in recruitment and retention strategies. HR teams must balance the need for high-volume, entry-level roles with the mathematical necessity of meeting quota targets.

When we analyze the mechanics of this, we see a clear incentive structure. The government is using the Nitaqat Mutawar phase to drive the quality of employment, not just the quantity. By penalizing low-wage entries (in terms of quota credit) and rewarding higher-wage entries, the policy aims to move nationals into higher-value roles. However, for businesses with thin margins, this creates a direct conflict between labor cost optimization and regulatory compliance.

Analysis: The Wage-Compliance Trade-off

There are two primary ways an HR leader might interpret these wage-based quota rules. One reading is that the policy is a tool for social engineering, designed to prevent "tokenism" where companies hire nationals at the minimum wage just to tick a box. By making low-wage employees count as only 0.5 units, the regulator makes it more expensive (in terms of quota) to hire low-paid nationals. The second reading is that this is a logistical burden for small and medium enterprises (SMEs) that rely on entry-level staff to maintain operational viability.

The data shows that Saudization quotas in the private sector typically reach up to 70 percent and can reach 100 percent for certain jobs (agbi.com). When you combine a 70 percent quota requirement with a rule that says low-wage employees only count as half a person, the mathematical difficulty of compliance increases exponentially. An organization cannot simply "hire their way" out of a quota problem if those hires do not meet the minimum wage threshold required to count as full units.

Professional accreditation and the engineering bottleneck

A specific challenge has emerged for technical sectors, particularly those involving engineering. The regulations have become highly specific regarding professional accreditation and minimum salary requirements for specialized roles. Establishments with three or more workers in 46 engineering professions must meet a 30 percent quota with a minimum monthly salary of SAR 8,000 and Saudi Council of Engineers (SCE) accreditation (middleeastbriefing.com). Additionally, a 30% Saudisation requirement applies to companies with five or more engineers (vialtopartners.com).

This creates a "double hurdle" for engineering firms. It is not enough to hire a Saudi engineer; that engineer must also be accredited by the SCE and must earn a minimum of SAR 8,000 (middleeastbriefing.com). If the engineer is not accredited, they may not contribute to the quota in the way the company requires. This makes the recruitment of engineers a highly specialized task that requires verifying both professional credentials and salary alignment before a contract is even signed.

Employee Category / Requirement Minimum Salary (SAR) Quota Contribution Requirement
Low-wage Saudi (below 3,000) < 3,000 0 Units None specified
Mid-wage Saudi (3,000 to 4,000) 3,000 - 4,000 0.5 Units None specified
Accredited Engineer (3+ employees) 8,000 30% Quota target SCE Accreditation

What the data does not say is the exact impact on the "unemployment" or "underemployment" of Saudi engineers who may be working in roles that do not meet these specific criteria. However, for the HR professional, the data is clear: the engineering sector is no longer a generalist recruitment area. It is a highly regulated, high-cost, and high-compliance segment of the workforce.

The UAE-KSA Divergence: A dual-front challenge

While Saudi Arabia focuses on the depth and quality of employment through wage-linked units and professional accreditation, the UAE's recent moves emphasize the breadth of localization through the Emiratisation charge. This creates a complex situation for regional groups operating in both markets.

An executive overseeing both Riyadh and Dubai cannot use a single "localization playbook." In Saudi Arabia, the focus is on the value of the employee (salary and accreditation) and the digital status of the contract (Qiwa). In the UAE, the focus is on meeting the specific sector-based Emiratisation targets. A company might be compliant in Dubai while being non-compliant in Riyadh, even if their total number of local employees is the same.

This divergence requires a more sophisticated approach to regional workforce planning. We are seeing a move away from centralized, one-size-fits-all HR policies toward a decentralized model where local compliance specialists manage the specific digital and professional requirements of each jurisdiction.

Compliance is no longer a "once-a-year" audit. It is a real-time data stream. If your Qiwa dashboard is not updated weekly, you are already behind.

Why It Matters

What HR can do on Monday morning

To move from reactive firefighting to proactive workforce planning, HR teams should implement the following measures immediately. These are not vague goals, but specific operational checks.

  1. Audit the Qiwa link: Run a report comparing your internal payroll list of Saudi employees against the "authenticated contracts" list on the Qiwa platform. Any discrepancy is a direct threat to your Nitaqat status (middleeastbriefing.com).
  2. Segment by "Unit Value": Categorize your Saudi workforce into three segments: those earning <3,000 (0 units), those earning 3,000-4,000 (0.5 units), and those earning >4,000 (1 unit). Use this to calculate your *actual* compliance, not your headcount (vialtopartners.com).
  3. Verify Engineer Accreditation: For any engineering-related role, verify the Saudi Council of Engineers (SCE) accreditation status of the employee and ensure their salary meets the SAR 8,000 threshold for quota purposes (middleeastbriefing.com).
  4. Review the "Nitaqat Mutawar" Timeline: Ensure your 2026-2028 workforce plan accounts for the specific professional sectors targeted by the MHRSD, such as legal and retail services (agbi.com).

The era of treating localization as a "headcount" problem is over. It is now a data, wage, and accreditation problem. Companies that treat it as a simple recruitment task will find themselves in a constant state of non-compliance. Those that treat it as a core component of their data management and compensation strategy will be the ones that successfully navigate the 2026 regulatory landscape.

Written byFizza Fatima Naqvi

Fizza helps organizations strengthen the people side of performance, from recruitment and onboarding to performance management, training, and employee relations. An HR professional with an MBA in Human Resource Management and a BBA with Honours, she has hands-on experience as an HR Generalist, supporting recruitment, onboarding, performance appraisal, HR policy implementation, and employee training workshops. Her grounding in research methodology and statistical analysis informs how she approaches human resource questions.